Showing 81–96 of 168 results
-
$100.00
This package includes a set of basic structural plans with a sample quiz to help prepare candidates for the plan reading portion of the ICC/TMS Structural Masonry Special Inspection Examination. The sample quiz includes 8 questions with answers based on the plan set.
This product is provided as a secure PDC file and can only be opened through the Locklizard Safeguard Viewer. Other PDF Viewers will not be able to read this file. This document can only be opened by a single user and allows limited printing of up to 2 watermarked copies. Read more about these limitations.
-
$0.00
This series of topic sheets describe several elements of masonry construction whose proper execution contributes to a functional installation. They will be most useful to the individual who may be a new member to a masonry construction team and unfamiliar with masonry requirements, details, and processes. They are intended to be used at preconstruction or progress meetings as a means to encourage communication between contractors, designers, inspectors, and other team members to help assure that the installation is consistent with contract documents.
These topic sheets are not intended to replace specifications or become part of the contract documents. The authors believe that the information provided is accurate; however, this information should not be solely relied upon for construction. The Masonry Society has tried to ensure that the information provided is accurate; however, this information should not be relied upon for construction.
-
$75.00
TMS Journal, Vol. Vol. 27, No. 1, July 2009
- Compressive Strength of Clay Brick Masonry, Saman A. Aryana and John H. Matthys
- In-Plane Behavior of a Confined Masonry Wall, Khashair Pourazin and Sassan Eshghi
- Performance of Lap Splices in Concrete Masonry Shear Walls, J.Z. Mjelde, D.I. McLean, J.J. Thompson, and W.M. McGinley
- Wind and Earthquake Shear Load in Symmetrical Loadbearing Masonry Buildings, Pedro Sing-Sang, Yuri Totoev, and Adrian W. Page
-
$75.00
TMS Journal, Vol. 28, No. 1, January 2010
- Finite Element Analysis of a Panelized Brick Veneer Wall System and Comparison with Wind Load Testing Results, Jianhai Liang and Ali M. Memari
- A Moment Magnification Approach for Unreinforced Masonry Design, Richard M. Bennett
- A Planar-Frame Model for Nonlinear Response of Low-Rise URM Buildings, Youssef Belmouden and Pierino Lestuzzi
- Study of System-Component Interactions in a Thin-Tile Masonry Dome, Andrew D. Sorensen and Ece Erdogmus
-
$75.00
TMS Journal, Vol. 28, No. 2, December 2010
- Design Provisions for Post-Tensioned Masonry Walls Loaded Out-of-Plane, Jennifer R. Bean Popehn and Arturo E. Schultz
- Effective Shear Design of Reinforced Masonry Beams, Salah R. Sarhat and Edward G. Sherwood
- Evaluation of Design Provisions for In-Plane Shear in Masonry Walls, C.L. Davis, D.I. McLean, and J.M. Ingham
- Performance of Poor-Quality Indigenous Brick Walls Strengthened by GFRP, Ghassan K. Al-Chaar
- Stochastic Bayesian Calibration of Finite Element Models of Masonry Vaults, Sezer Atamturktur and Thomas Boothby
-
$75.00
TMS Journal, Vol. 29, No. 1, December 2011
- January 2010Behavior of Masonry Subject to Load Parallel to Bed Face, Sreekanta Das, Thomas Ring, and David Stubbs
- Effects of Fibers on Flexural Strength of Masonry Mortars, Catherine K. Armwood, Ece Erdogamus, and Hani Haider
- In-Plane Behavior and Strength of Fully-Grouted Reinforced Masonry Shear Walls, Ehsan Minaie, Michael C. Mota, Franklin L. Moon, and Ahmad A. Hamid
- MSJC Deep Beam Requirements, Fernando Fonseca, Sunup S. Mathew, and Richard M. Bennett
- Study of Tile Layer Contribution of a Thin-Tile Masonry Dome, Andrew D. Sorensen and Ece Erdogamus
-
$75.00
TMS Journal, Vol. 30, No. 1, December 2012
- Behavior of Clay Brick Confined Masonry Walls under Cyclic Loads, Behrang Sarrafi and Sassan Eshghi
- Effect of Test Conditions on the Compressive Strength of Concrete Masonry Units, Mina Gayed, Yasser Korany, and Mohammed Nazief
- Interface Shear Transfer Between Grout and AAC Masonry, Miguel Forero Henao, Monica Puglisi, and Richard E. Klingner
- Splice Provisions for Deformed Reinforcement Surrounded by Grout in AAC Masonry, Miguel Forero Henao, Monica Puglisi, and Richard E. Klingner
-
$75.00
TMS Journal, Vol. 31, No. 1, December 2013
Technical Papers
- Concepts of Shear Friction Applied to Masonry Shear Walls, Shane C. Morrison and Richard M. Bennett
- In-Plane Loading of Brick Veneer over Wood Shear Walls, James M. Lintz and Elias A. Toubia
- Performance Based Seismic Design of a Confined Masonry Building, Sassan Eshghi & Khashaiar Pourazin
- Sliding Shear Resistance of Reinforced Masonry Shear Walls, Farhad Ahmadi , Jaime Hernandez , Geoff Scheid , and Richard E. Klingner
General Interest Topics
- Testing Flexural Tension Strength of Masonry with Low-Pressure Vacuum, Kenneth C. Hover, Timothy K. Bond, David Farmer
- Â and Richard E. Klingner
-
$75.00
TMS Journal, Vol. 32, No. 1, December 2014
- Effect of Height-to-Thickness Ratio on Compressive Strength of Masonry, Sreekanta Das, Jiaji Liu, Mohamed El Sayed, and Sara Kenno
- Evaluation of Modeling Scheme for Unreinforced Masonry Under Seismic Loading, Laura Redmond, Andreas Stavridis, and Reginald DesRoches
- Seismic Behavior of Reinforced Concrete Masonry Shear Walls as Governed by Flexure, Farhad Ahmadi, Jaime Hernandez, Juan Diego Rodriguez, and Richard E. Klingner
- Evaluation of 2011 MSJC Strength-Design Shear Provisions for Reinforced Masonry Shear Walls, Saleh Alogla, Farhad Ahmadi, Jaime Hernandez, Richard E. Klingner, and David I. McLean
- FRCM-Strengthened CMU Masonry Walls Subjected to Out-of-Plane Load, Saman Babaeidarabad, Giovanni Loreto, Diana Arboleda, and Antonio Nanni
-
$75.00
Standards for Architectural Cast Stone contains three standards and their commentaries:
- Standard for the Design of Architectural Cast Stone (TMS 404)
- Standard for the Fabrication of Architectural Cast Stone (TMS 504)
- Standard for the Installation of Architectural Cast Stone (TMS 604)
Other Formats:Â Â Protected Download (Single User)
-
$71.50
Fire resistance of building elements is an important consideration in building design. While structural design considerations for concrete and masonry at ambient temperature conditions are addressed by ACI 318 and TMS 402/ACI 530/ASCE 5, respectively, these codes do not consider the impact of fire on concrete and masonry construction. This standard contains design and analytical procedures for determining the fire resistance of concrete and masonry members and building assemblies. Where differences occur in specific design requirements between this standard and ACI 318 and TMS 402/ACI 530/ASCE 5, as in the case of cover protection of steel reinforcement, the more stringent of the requirements shall apply.
Errata as of 2017-10-20
Other Formats:Â Â Protected Download (Single User)
-
$45.00
Following the tragic events of September 11, 2001, the Federal Emergency Management Agency (FEMA) and the American Society of Civil Engineers (ASCE) conducted an investigation of the World Trade Center and surrounding damaged buildings. At the request of The Masonry Society, David T. Biggs of Ryan-Biggs Associates participated on the investigation team. This report presents his personal observations of Ground Zero, the towers’ collapse, and the performance of masonry on the surrounding buildings.
-
$75.00
TMS Journal, Vol. 34, No. 1, December 2016
Technical Papers
- Capacity of Masonry Loaded by Through-Bolts in Double Shear, By: Gaur P. Johnson, Ian N. Robertson, and James Aoki
- Preliminary Method to Determine CO2 Sequestration in Cementitious Units, By: Canan D’Avela, Jiangyin Bao, Fred W. Croxen III, Robert T. Downs, Steve Fickett, Hugh Rodrigues, David Rothstein, and Jason J. Thompson
- Shear and Tensile Strength Equations for Analysis of Grouted Masonry By: Laura Redmond, Lawrence Kahn, and Reginald DesRoches
General Interest Papers
- A Review of Reconstruction Methods and Materials for Ancient Dry Stack Structures, By: Ariel Kousgaard and Ece Erdogmus
- Why is the Masonry Market in Brazil Booming? By: Guilherme Aris Parsekian, José Luiz Pereira, and Fernando S. Fonseca
-
Sale!
$10.00 Original price was: $10.00.$0.00Current price is: $0.00.
TMS Responds is a resources developed to help answer common, and sometimes, not so common questions on masonry materials, design, construction, evaluation, and repair.
Vol. 15, No. 1 (February 2017), responds to questions on:
- TMS 402/602-16
- Cast Stone Standards
- Moment Magnifier for Piers/Walls
- Existing Masonry Terms
- Air Entrainment in Grout
-
$150.00
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-16) and Specification for Masonry Structures (TMS 602-16). The Standards are written as legal documents so that they may be adopted by reference in building codes.
The Code (TMS 402) covers the design and construction of masonry structures while the Specification (TMS 602) is concerned with minimum construction requirements for masonry in structures. The commentaries present background details, Committee considerations, and research data used to develop the standards. The commentaries are not mandatory and are for information of the user only. The 2018 IBC (International Building Code) references the 2016 TMS 402 and TMS 602 for the design and construction of structural masonry, veneer, and glass unit masonry, and it uses the quality assurance provisions from TMS 602 for masonry inspection.
The standards were previously developed through the Masonry Standards Joint Committee (MSJC) and were formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ACI 530.1/ASCE 6.
Available Formats
Online Subscription Access
Available online with improved features (copy, print, highlight, annotate, and more) plus more multi-user flexibility through Masonry Standards Online.
- TMS Members – 50% off all subscriptions + multi-user discounts
- Non-Members – 40% off an annual subscription by adding it to your cart along with either a hard copy or download
